Electroluminescent Technical Specifications

BRIGHTNESS	200 cd / m2
LONGEVITY	30,000 Hours depending on the lamps environment, driving condition and duty cycle
WARRANTY	1 Year factory warranty for all Electroluminescent panels and Inverters
SIGN MATERIAL	Multi-laminate construction
SIZES & SHAPES	Custom shapes available. Any size can be achieved by joining panels together
VIEWING ANGLE	>160 Degrees
APPLIED VOLTAGE	AC 50 Vrms to AC 220Vrms (For Split-Electro up to 350vac)
APPLIED FREQUENCY	50 HZ to 3 KHZ
INDOOR/OUTDOOR	Can operate in both environments
PANEL OPERATING TEMPERATURE	- 20 degrees ~50 degrees (Nor.) / 70 degrees (Max)
PANEL STORAGE TEMPERATURE	- 40C to + 70C
PANEL OPERATING HUMIDITY	0% ~ 90%
OPERATING CURRENT (100vrms/400Hz)	1.5~2.5 mA /sq.in
OPERATING POWER	Low power consumption. Approx 5-10 watts
POWER RESOURCES	DC 1.5V to 24V and or AC110/220V
POWER INVERTER	Different power configurations to optimize sign parameters
CAPACITANCE	2 - 5 nF / sq.in
THICKNESS	0.2~0.4mm (min 0.119mm For 2nd Generation Foil)
PANEL WEIGHT	A typical display with size of 152mm x 305mm weighs ~284g
SAFETY	No Ultraviolet Radiation emitted
BEND RADIUS	0.25" - Normal 2nd Generation Foil - Foldable
NORMAL EDGE SEAL	0.08"(2mm)
MIN. EDGE SEAL	0.03"(0.76mm)
LEAD PULLING	0.5kg 10sec.
LEAD BENDING	90 degrees 250gr bending 2 times
SOLDERING HEAT RESISTANCE	250 degrees 3sec>3mm distance from EL panel with extra force applied
TESTING	Environmental, Storage & temperature Shock Tests
CERTIFICATIONS	All the below Certifications for Electroluminescent panels and Inverters are available upon request